4.
Turn the Adjustment Knob (14) clockwise to tighten the Movable Jaw (9) on the workpiece.
Do not overtighten the Vise on the workpiece; damage may occur to the workpiece.
5.
When you are finished, turn the Adjustment Knob (14) counterclockwise to remove your
workpiece from the jaws.
6.
Note that the Vise comes with a Soldering Iron Holder (17) to use as needed.
Unpacking
When unpacking the Wide Opening Vacuum Vise , check to make sure the following parts are
included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS
at 1-800-444-3353.
Parts List
Part #
Description
Quantity
Part #
Description
Quantity
1
Rubber Pad
1
10
Jaw Covers
2
2
Lever
1
11
Bolt
1
3
Base
1
12
E-Clip
1
4
Pivot Stop
1
13
Washer
1
5
Pivot Stop Screw
1
14
Adjustment Knob
1
6
Pivot Support
1
15
Screw
1
7
Jaw Guide
1
16
Washer
1
8
Fixed Jaw
1
17
Soldering Iron Holder 1
9
Movable Jaw
1
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
SKU 91381
Page 4
