CENS ProFlex digital 1, User Manual

(a) Volume control & on/off switch The volume control is used to set the desired

listening level and turn the devices on/off.  The output is, however, limited and

will not exceed uncomfortable levels (for a typically normal ear).  It is,

nevertheless, recommended that the instruments are not used on full volume for

prolonged periods, but at a comfortable listening level only.  The function of these

devices is to act as a noise plug and not a hearing aid.

(b) Battery tray  Allows easy access to the battery to facilitate replacement.  Place

a fingernail under the notch, then lift to open the battery tray for battery

replacement. Lifting the battery tray will not cause the battery to fall out.

(c) Microphone The microphone is positioned under the switch position (d) and

the ambient sounds are picked up and fed into the instrument.  It also features a

wind/noise reduction system with rain splash guard to protect the microphone.

Your CENS ProFlex

(d) Push-button switch (CENS ProFlex digital 2 & Hunter only)

Pressing this button will allow the user to toggle between memories.  A single

bleep indicates programme 1 and a double bleep indicates programme 2.

(e) Ultra comfortable clear tip - for extra comfort in the ear canal. This super soft

part is transparent to allow you to see if the sound tube is blocked.

ProFlex

CENS

digital 

6

CENS ProFlex User Guide V2_Layout 1  11/06/2010  13:35  Page 6