Data Logger
Instruction Manual
7
V. Setup ThermoLog (Thermo DataLogger)
—
RS232 interface software:
The ThermoLog package contains:
1.Two 3.5” diskettes
2.Custom designed RS232 cable for THERMOLOG.
System Required:
Windows 95 or Windows 98 or Windows NT 4.0 above.
Minimum Hardware Required:
486-100 MHz PC compatible , 16 MB RAM ;
At least 5 MB hard disk space available to install THERMOLOG program. Recommended
display resolution is 800X600.
Install ThermoLog:
1.We recommend close all other application before installing ThermoLog.
2.Insert setup diskette 1 to floppy disk drive.
3.Choose the Start button on the Taskbar and select Run.
4.Type A:\SETUP and choose OK, then it will copy ThermoLogg.exe ( executable file ) and help
file to your hard disk ( default is c:\program files\ThermoLog ).
For other operation instruction, please refer to the on-line help while executing ThermoLog.
Main Menu
Link Test :
Open Link Test window to search for thermometer connected to PC. When you start the
THERMOLINK, this window will display first and search for thermometer. The result will be
shown in the text box.
click to exit ThermoLog
click to show on-line help
click to show the present list data
click to load the recorded data form
thermometer
it shows whether thermometer is
connected or not
click to show the
presentgraph window
click to show graph ,
panel and tabular
window.
click to show panel
window
click to test if there is any
thermometer connected to PC
