7
7
SQUARE 150P User Manual
Eng
y
The unit can not be used near water; for example near a bathtub, a kitchen sink,
a swimming pool, etc.
3.3. Heat
y
Do not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that
no ventilation slots on the product’s housing are blocked.
y
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Don not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -20°C to 55°C (-4°F to 131°F).
3.4. Servicing
y
Do not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use
accessories/attachments or parts recommended by the manufacturer.
4 - i
nTroduCTion
Centolight SQUARE 150P is a professional LED Profile with 26° beam (also available
optional 19° lens tube) designed for theaters and fixed installations where high LED
chip reliability and warm white lighting (approx. 3.200K) are required.
The light source is a 150W CITILED® LED with CRI ≥90 to allow excellent color
rendering, especially in indoor venues like TV studios, theaters and museums. Great
attention is paid to quality of dimmer control and chip temperature, to minimize the
consequences of using LEDs instead of traditional lamps.
The cooling system uses high precision fans in order to keep noise within 25dB @
1m. The 4 beam-shaping shutter system allows both radial and angled adjustment
of the beam. The fixture is equipped with a compartment for gobos and manual iris
(both optional), as well as the front color-frame holder (included).
4.1.
Features
y
LED Profile Spot with 26° Beam (19° optional)
y
Light Source: 150W Warm-White (3200K) CITILED® LED with over 50,000h
lifetime
y
Radial/Angled Blade-Framing System
