8
PLACING AND INSTALLATION
Before connecting the appliance to electrical power supply, leave it stand for about 2 hours, which will
reduce the possibility of malfunction in the cooling system due to transport handling.
Clean the appliance thoroughly, especially in the interior. In case the interior accessories are not correctly
placed, rearrange them as described in the manual.
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room. Do not place the appliance near a heat source
(e.g. cooking appliances, radiators, water heaters or similar devices) and do not expose to direct sunlight.
Avoid locations subject to vibrations and excessive dust, or moisture.
The appliance should be positioned at least 3 cm away from cooking appliances and at least 30 cm away
from oil or coal fired stoves. If this is not possible, use an appropriate insulation barrier.
Ventilation Requirements
Behind the appliance there should be a free space of at least 200cm wide and above the appliance kitchen
units (cupboards) should be at least 5 cm away from the appliance in order to assure adequate ventilation.
Installation
