31810
For technical questions, please call 1-888-866-5797.
Page 3
4.
Do not expose power tools to rain
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock.
5.
Do not abuse the Power Cord.
Never use the Power Cord to carry
the tools or pull the Plug from an
outlet. Keep the Power Cord away
from heat, oil, sharp edges, or
moving parts. Replace damaged
Power Cords immediately.
Damaged Power Cords increase the
risk of electric shock.
6.
When operating a power tool
outside, use an outdoor extension
cord marked “W-A” or “W”.
These
extension cords are rated for outdoor
use, and reduce the risk of electric
shock.
PERSONAL SAFETY
1.
Stay alert. Watch what you are
doing, and use common sense
when operating a power tool. Do
not use a power tool while tired
or under the influence of drugs,
alcohol, or medication.
A moment
of inattention while operating power
tools may result in serious personal
injury.
2.
Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
3.
Avoid accidental starting.
Be sure
the Power Switch is off before
plugging in.
Carrying power tools
with your finger on the Power Switch,
or plugging in power tools with the
Power Switch on, invites accidents.
4.
Remove adjusting keys or
wrenches before turning the power
tool on.
A wrench or a key that is
left attached to a rotating part of the
power tool may result in personal
injury.
5.
Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables
better control of the power tool in
unexpected situations.
6.
Use safety equipment. Always
wear eye protection.
Dust mask,
nonskid safety shoes, hard hat, or
hearing protection must be used for
appropriate conditions.
TOOL USE AND CARE
1.
Use clamps (not included) or
other practical ways to secure and
support the workpiece to a stable
platform.
Holding the work by hand
or against your body is unstable and
may lead to loss of control.
2.
Do not force the tool. Use the
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it is
designed.
3.
Do not use the power tool if the
Power Switch does not turn it
on or off.
Any tool that cannot be
controlled with the Power Switch is
dangerous and must be replaced.
4.
Disconnect the Power Cord Plug
from the power source before
making any adjustments, changing
accessories, or storing the tool.
Such preventive safety measures
reduce the risk of starting the tool
accidentally.
