31810
For technical questions, please call 1-888-866-5797.
Page 4
5.
Store idle tools out of reach of
children and other untrained
persons.
Tools are dangerous in the
hands of untrained users.
6.
Maintain tools with care.
Keep
cutting tools sharp and clean.
Properly maintained tools with a
sharp cutting edge are less likely to
bind and are easier to control. Do not
use a damaged tool. Tag damaged
tools “Do not use” until repaired.
7.
Check for misalignment or binding
of moving parts, breakage of
parts, and any other condition that
may affect the tool’s operation. If
damaged, have the tool serviced
before using.
Many accidents are
caused by poorly maintained tools.
8.
Use only accessories that are
recommended by the manufacturer
for your model.
Accessories that
may be suitable for one tool may
become hazardous when used on
another tool.
SERVICE
1.
Tool service must be performed
only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in
a risk of injury.
2.
When servicing a tool, use
only identical replacement
parts. Follow instructions in the
“Inspection, Maintenance, And
Cleaning”
section of this manual.
Use of unauthorized parts or failure
to follow maintenance instructions
may create a risk of electric shock or
injury.
SPECIFIC SAFETY RULES
1.
Wear ANSI-approved safety impact
eye goggles, hearing protection,
and a dust mask or respirator
when operating this product.
2.
The Housing contains a high speed
Impeller that can amputate fingers,
grab loose clothing and long hair,
and propel sawdust at high velocities.
NEVER
operate this product without
the all guards and screens in place
and working properly.
3.
If using this product to help keep
airborne sawdust within acceptable
limits, you must regularly monitor
airborne sawdust and maintain the
Tool to avoid exceeding dust limits.
Each application is unique, and
your maintenance schedule must be
tailored to your specific use.
4.
Industrial applications must follow
OSHA requirements.
5.
Use the right tool or attachment
for the right job.
Do not attempt to
force a small tool or attachment to
do the work of a larger industrial tool.
There are certain applications for
which this product was designed. It
will do the job better and more safely
at the rate for which it was intended.
Do not modify this product, and do
not use this product for a purpose for
which it was not intended.
6.
Turn off the Tool and unplug
the Power Cord Plug from its
electrical outlet before changing
accessories or performing
inspection, maintenance, or
cleaning procedures.
