SKU 38119
For technical questions, please call 1-800-444-3353.
Page 4
KEEP CHILDREN AWAY. All visitors
5.
should be kept safe distance from
work area.
MAKE WORKSHOP KID PROOF
6.
with padlocks, master switches, or by
removing starter keys.
DON’T FORCE TOOL. It will do the
7.
job better and safer at the rate for
which it was designed.
USE RIGHT TOOL. Don’t force tool
8.
or attachment to do a job for which it
was not designed.
REcOMMEnDED MInIMuM WIRE
gaugE FOR EXtEnSIOn cORDS
(120 VOLt)
naMEPLatE
aMPERES
(at full load)
EXtEnSIOn cORD
LEngth
25’
50’ 100’ 150’
0 – 6
18
16
16
14
6.1 – 10
18
16
14
12
10.1 – 12
16
16
14
12
12.1 – 16
14
12
Do not use.
tabLE a
USE PROPER EXTENSION CORD.
9.
Make sure your extension cord
is in good condition. When using
an extension cord, be sure to use
one heavy enough to carry the
current your product will draw. An
undersized cord will cause a drop in
line voltage resulting in loss of power
and overheating.
Table A shows the
correct size to use depending on cord
length and nameplate ampere rating.
If in doubt, use the next heavier gage.
The smaller the gage number, the
heavier the cord.
WEAR PROPER APPAREL. Do
10.
not wear loose clothing, gloves,
neckties, rings, bracelets, or other
jewelry which may get caught in
moving parts. Nonslip footwear is
recommended. Wear protective hair
covering to contain long hair.
ALWAYS USE SAFETY GLASSES.
11.
Also use face or dust mask if
cutting operation is dusty. Everyday
eyeglasses only have impact
resistant lenses, they are NOT safety
glasses.
SECURE WORK. Use clamps or a
12.
vise to hold work when practical. It’s
safer than using your hand and it
frees both hands to operate tool.
DON’T OVERREACH. Keep proper
13.
footing and balance at all times.
MAINTAIN TOOLS WITH CARE.
14.
Keep tools sharp and clean for best
and safest performance. Follow
instructions for lubricating and
changing accessories.
DISCONNECT TOOLS before
15.
servicing; when changing
accessories, such as blades, bits,
cutters, and the like.
REDUCE THE RISK OF
16.
UNINTENTIONAL STARTING. Make
sure switch is in off position before
plugging in.
USE RECOMMENDED
17.
ACCESSORIES. Consult the
owner’s manual for recommended
accessories. The use of improper
accessories may cause risk of injury
to persons.
NEVER STAND ON TOOL. Serious
18.
injury could occur if the tool is tipped
or if the cutting tool is unintentionally
contacted.
