Page 2
SKU 45656
For technical questions, please call 1-800-444-3353.
SpECIFICATIONS
Electrical Requirements
220 V~ / 60 Hz / 10.5 A
1 HP Motor / 1740 RPM / 1 Phase
Max. Wheel Diameter
39”
Max. Rim Diameter
10”-20”
Max. Wheel Width
13”
External Locking Rim Dimensions 10”-18”
Internal Locking Rim Dimensions
12”-20”
Max. PSI Working Pressure
110 PSI
Bead Break Force
2500 kg
Max. Rotation Torque (Turntable)
795 ft-lb
Air Inlet Fitting Size
1/4” NPT
Shipping Weight
471 lb.
SAVE THIS MANUAl
You will need this manual for the safety warnings and precautions, assembly,
operating, maintenance procedures, and parts lists/ assembly diagrams. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND pRECAUTIONS
1.
KEEp WORK AREA ClEAN AND DRY.
Cluttered, damp or wet work areas
invite injuries.
2.
KEEp CHIlDREN AWAY FROM WORK AREA.
Do not allow children to handle
this product.
3.
STORE IDlE EQUIpMENT.
When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.
4.
DO NOT USE THIS pRODUCT IF UNDER THE INFlUENCE OF AlCOHOl OR
DRUGS.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this tool.
5.
USE EYE AND HEARING pROTECTION.
Wear ANSI approved safety impact
eye glasses and ANSI approved hearing protection when working with this
