SKU 62291
For technical questions, please call 1-888-866-5797.
Page 2
SAVE THIS MANUAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual (or
month and year of purchase if product has
no number). Keep this manual and the
receipt in a safe and dry place for future
reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
WARNING! Read all instructions.
Failure to follow all instructions
listed below may result in fire,
serious injury and/or DEATH.
The warnings and precautions
discussed in this manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into
this product, but must be supplied
by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY
PRECAUTIONS
1. Set up and use only on a flat, level,
outdoor, well-ventilated area.
2. Wear ANSI-approved safety glasses
under a full face shield, NIOSH-
approved dust mask/respirator,
heavy-duty work gloves, hard hat,
and steel-toe work boots during set
up and use.
3. Keep children away from the
equipment, especially while it is
operating.
4. Do not leave the equipment
unattended when it is running. Turn
off the equipment before leaving the
work area.
