background image

SKU 62291 

For technical questions, please call 1-888-866-5797. 

Page 3

5.  Use only accessories that 

are recommended by 

Harbor Freight Tools for your model.  

Accessories that may be suitable for 

one piece of equipment may become 

hazardous when used on another 

piece of equipment.

6.  Stay alert, watch what you are 

doing and use common sense when 

operating this piece of equipment.  

Do not use this piece of equipment 

while tired or under the influence of 

drugs, alcohol or medication.

7.  Do not overreach.  Keep proper 

footing and balance at all times.  

This enables better control of the 

equipment in unexpected situations.

8.  Dress properly.  Do not wear loose 

clothing or jewelry.  Keep hair, 

clothing and gloves away from 

moving parts.  Loose clothes, jewelry 

or long hair can be caught in moving 

parts.

9.  Keep the equipment and surrounding 

area clean at all times.

10.  Use the equipment, accessories, etc., 

in accordance with these instructions 

and in the manner intended for the 

particular type of equipment, taking 

into account the working conditions 

and the work to be performed.  Use 

of the equipment for operations 

different from those intended could 

result in a hazardous situation.

11. 

Moving parts can crush 

and cut hands and fingers.  

Keep hands clear of the 

Ram Plate, Wedge, and 

logs while splitting.

12.  Be thoroughly familiar with all controls 

and with the proper use of the Log 

Splitter.  Know how to stop the Log 

Splitter and relieve system pressure 

quickly if needed.

13.  Make sure all fittings are tight before 

applying pressure.

14.  Be aware of the added length of the 

Log Splitter when transporting.

15.  If a log becomes jammed in the 

Wedge, back off pressure and 

remove log with a pry bar.

16. 

FIGURE A

CORRECT

LOG

ORIENTATION

INCORRECT

LOG

ORIENTATION

This Log Splitter is designed to split 

logs up to 

18” long and 6-1/2” in 

diameter, lengthwise with the grain 

only. (See Figure A.)

17.  Always operate the Log Splitter with 

all safety equipment in place and in 

proper working order, and all controls 

properly adjusted for safe operation.

18.  Always relieve the system pressure 

before inspecting, cleaning, adjusting, 

or repairing the Log Splitter.

19.  WARNING: This product contains 

or, when used, produces a chemi-

cal known to the State of California 

to cause cancer and birth defects or 

other reproductive harm.  (Califor-

nia Health & Safety Code § 25249.5, 

et seq.

)

20.  When spills of fuel or oil occur, they 

must be cleaned up immediately.  

Summary of Contents for 62291













Reviews: