Page 2
For technical questions, please call 1-888-866-5797.
Item 62518
SPECIFICATIONS
Bending Capacity
(Gauge x Width)
Up to 12 Gauge Sheet Metal at 18"
Up to 16 Gauge Sheet Metal at 36"
Up to 16 Gauge Mild Steel at 18"
Up to 20 Gauge Mild Steel at 36"
Up to 22 Gauge Stainless Steel
Bend Angles
0 to 120°
Max. Box Depth
3"
Max. Beam Lift
7/8"
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Place only on a flat, stable surface able
to support weight of Metal Brake, item
being bent, and the bending force.
5. Verify that installation surface has no hidden
utility lines before drilling the holes.
6. Keep bystanders out of the area during assembly.
7. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
8. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Keep fingers clear of the Frame (19)
and Upper Press Plate (10).
5. Do not exceed the maximum bending capacities
of 18" wide stock (for 12 gauge steel) or
36" wide stock (for 16 gauge steel.)
6. Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
