Page 5
For technical questions, please call 1-800-444-3353.
SKU 67414
off the equipment (and remove safety
keys, if available) before leaving the
work area.
Wear ANSI-approved safety goggles,
14.
heavy duty work gloves, and steel-
toed heavy-duty work boots during
setup and use.
Maintain a firm grip on the Auger
15.
drill with both hands and be aware
of the strong start-up torque of the
tool.
Keep your thumb near the Kill
16.
switch in the event the auger drill
must be turned off immediately.
do not use the auger drill if the
17.
auger is dull, bent, or damaged.
drill with the engine running at
18.
full speed.
Fully squeeze the Speed
Control Lever to maintain a steady
drilling speed.
Keep the auger clean and
19.
undamaged.
Keep all guards and safety devices
20.
in proper working order and
properly adjusted.
before starting the engine, make
21.
sure the auger is not contacting
any object.
When shutting off the engine,
22.
make sure the auger has stopped
before setting the tool down.
People with pacemakers should
23.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to a heart pacemaker
could cause pacemaker interference
or pacemaker failure. Caution is
necessary when near the engine’s
magneto or recoil starter. Engine
should be off during distributor
adjustment.
Use only accessories that are
24.
recommended by Harbor Freight
Tools for your model. Accessories
that may be suitable for one piece of
equipment may become hazardous
when used on another piece of
equipment.
Do not operate in explosive
25.
atmospheres, such as in the
presence of flammable liquids, gases,
or dust. Gasoline-powered engines
may ignite the dust or fumes.
Stay alert, watch what you are
26.
doing and use common sense when
operating this piece of equipment.
Do not use this piece of equipment
while tired or under the influence of
drugs, alcohol or medication.
Do not overreach. Keep proper
27.
footing and balance at all times.
This enables better control of the
equipment in unexpected situations.
Dress properly. Do not wear loose
28.
clothing or jewelry. Keep hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry
or long hair can be caught in moving
parts.
Parts, especially exhaust system
29.
components, get very hot during use.
Stay clear of hot parts.
Do not cover the engine or equipment
30.
during operation.
Keep the equipment, engine, and
31.
surrounding area clean at all times.
Use the equipment, accessories, etc.,
32.
in accordance with these instructions