SKU 95346
for technical questions, please call 1-800-444-3353
PAGE 9
OPERAtION
Starting and Stopping
1.
WARNING! Always wear safety equipment.
When operating the Auger Drill,
wear ANSI-approved safety impact eye goggles, hearing protection, heavy duty
work gloves, sturdy work boots, and head protection.
Place the Auger Drill on its side with its Auger (33a) resting upon the ground surface
2.
location that is to be drilled.
Make sure that no debris, clothing, or other objects
are near the auger bit. Keep all bystanders away.
PRIMER (95)
cHOKE (76)
fRAME (1b)
StARtER
HANDLE
(7)
fIGURE c
3.
Depress the Primer (95) three to four times.
(See figure c.)
Set the Choke (76)
4.
(See figure c.)
to the appropriate position:
closed
if the Engine is cold.
Open
if the Engine is warm.
Grip the Frame (1b) firmly with your left hand. Keep all body parts well away from
5.
the bit. Then, with your right hand, pull rapidly on the Starter Handle (7) to start
the Engine.
(See figure c.)
