Page 2
SKU 45214
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended. Do not use to fill air/breathing tanks.
Motor Power
2 HP, 3450 rpm
Electrical
120V, 12 amps, 1400 watts, Single Phase, 60 Hz
NPT Air Outlet
1/4” NPT
Air Tank Size
3.5 Gallon
Maximum PSI
125 psi
Pressure Range
Pressure Switch on at 80 psi, off at 110 psi
Air Delivery (cfm)
5 @ 40 psi / 4.5 @ 70 psi / 3.8 @ 90 psi / 3.0 @ 110 psi
Pressure Disconnect
Automatic at 170 psi
Pump Stage
Single
Oil Requirement
Standard non-detegent, 30 weight compressor or motor oil
Optimal capacity for oil tank is 7.8 ounces.
REV 02/04
