Page 3
For technical questions, please call 1-800-444-3353.
94801 / 65594 95
7.
Maintain proper footing and balance
at all times.
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIP-
MENT DAMAGE, FIRE AND SHOCK, MAKE SURE
YOUR
WORK AREA
IS:
1.
Free of damp, wet or rainy conditions.
2.
Free of flammable gasses or liquids.
3.
Free of children (never let them
handle tools or machinery).
4.
Well-lit.
5.
Clean and uncluttered.
6.
Well-ventilated.
Before Operating
1.
Before using any tool, any part that
appears damaged should be carefully
checked to determine that it will
operate properly and perform its
intended function.
2.
Before operating your Air Tank, check
for damaged parts.
3.
Do not exceed the maximum PSI air
pressure (see Specifications Chart).
4.
Use compressed air only.
5.
When filling the tank, do not
over-pressurize.
6.
Do not over inflate.
Never exceed
the maximum pressure rating of any
inflatable. Check pressure frequently
during inflation.
7.
Pull the Safety Pressure Bypass Valve
prior to operation to ensure that the
valve is functioning properly and
to clear the valve of any possible
obstructions.
8.
Beware of possible explosion.
The
unit is capable of producing compressed
air at high pressure which could cause
tires, toys or other inflatables to explode.
This could result in serious injury.
9.
The brass components of this product
contain lead, a chemical known to
the State of California to cause birth
defects (or other reproductive harm).
(California Health & Safety code §
25249.5,
et seq.
)
10.
Store idle equipment.
When not in use,
tools must be stored in a dry location to
prevent damage from the elements.
11.
Do not fill from any compressed gas
cylinder.
12.
Only fill with air from a service station
or low pressure air compressor.
13.
Do not fill Air Tank with anything
other than air.
14.
Do not expose the Air Tank to severe
moisture or extreme heat.
15.
If a leak should develop in Air Tank,
discard immediately
. Do not attempt to
repair a damaged Air Tank.
16.
This product is not a toy.
Do not allow
children to play with or near this item.
17.
Use for intended purpose(s) only.
18.
Inspect before every use; do not use
if parts are loose or damaged.
19.
Maintain product labels and
nameplates.
These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools for
a replacement.
SAVE THESE
INSTRUCTIONS.
