SKU 65903
For technical questions, please call 1-800-444-3353.
Page 2
PROduCT SPECiFiCATiONS
Motor
240 V~ / 60 Hz / 9 A (Load) / Single Phase / 4 HP Peak /
3 HP Working / 3,400 RPM / Two Capacitor (Run & Start)
Overload Reset Button
15 A
Power Cord
12 Gauge, 3-Wire (Stripped), 10 Ft. Long
240 Volt Power Cord Plug Not Included.
Air Tank Capacity
29 Gallons
SCFM Airflow
8.74 @ 40 PSI / 7.7 @ 70 PSI /
7.47 @ 90 PSI / 6.67 @ 115 PSI
Compressor Pump Type
Dual V-Head Cylinder / Belt Driven
Safety Valve Setting
120 PSI
Air Pressure Gauge Indicators
0-200 PSI in 5 PSI Increments
Automatic Shut Off Capability
Shut Off at 115 PSI / Starts at 80 PSI
Required Air Quick Connector (Not Included)
1/4”-18 NPT Quick Connector
V-Belt Size
A1118 Li
Base Mounting Holes
Qty. 4 @ 1/2” Diameter
uNPACKiNG
When unpacking, check to make sure all the parts shown on the
Parts List
at the
end of the manual are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THiS MANuAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future refer-
ence.
GENERAL SAFETY RuLES
WARNiNG!
REAd ANd uNdERSTANd ALL iNSTRuCTiONS
Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious injury.
SAVE THESE iNSTRuCTiONS
WORK AREA
Keep your work area clean and well lit.
1.
Cluttered benches and dark areas invite
accidents.
