background image

Page 13

For technical questions, please call 1-800-444-3353.

SKU 67708 

        

maIntenance and 

SerVIcInG

  Procedures not specifically 

explained in this manual must 

be performed only by a qualified 

technician.

 

to PreVent 

SerIouS InjurY 

From accIdental 

oPeratIon: 

turn the Power Switch “oFF” 

and unplug the compressor from 

its electrical outlet before 

performing any inspection, 

maintenance, or cleaning 

procedures.
to PreVent SerIouS InjurY 

From comPreSSor FaIlure: 

do not use damaged equipment.  

If abnormal noise or vibration 

occurs, have the problem 

corrected before further use.

cleaning, maintenance, and 

lubrication

1. 

beFore eacH uSe,

 inspect the 

general condition of the Air Compressor.  

Check for loose hardware, misalignment 

or binding of moving parts, damaged 

belts, cracked or broken parts, damaged 

electrical wiring, and any other condition 

that may affect its safe operation.

2. 

aFter uSe,

 wipe external surfaces of 

the compressor with a clean cloth.

3. 

WarnInG!  If the supply cord 

of this compressor is damaged, it 

must be replaced only by a qualified 

service technician.

maintenance Schedule

Following are general guidelines 

for maintenance checks of the Air 

Compressor.

note:

 The environment in which the 

compressor is used, and the frequency 

of use can affect how often you will need 

to check the Air Compressor components 

and perform maintenance procedures.

daily:

a. Check oil level.
b. Check for oil leaks.
c. Make sure all nuts and bolts are tight.
d. Drain moisture from air tank.
e. Check for abnormal noise or vibration.
f.  Check for air leaks.

*

g. Wipe off any oil or dirt from the 

compressor.

**

Weekly:

a. Inspect Air Filter (6).
b. Inspect Oil Breather Plug (37).

monthly:

Inspect Safety Valve (73).

every 6 months or 100 operation Hours:

Replace Pump oil.

***

*  To check for air leaks, apply soapy water to 

joints while the Air Compressor is pressurized.  

Look for air bubbles.
**  To clean the compressor surface, wipe with 

a damp cloth, using a mild detergent or mild 

solvent.
***  Use Air Compressor Oil only (sold 

separately - SKU 95048).

Summary of Contents for 67708





















Reviews: