Page 2
For technical questions, please call 1-800-444 3353.
Item 67853
4. Set up and use only on a flat, level,
well-ventilated surface.
5. Use only lubricants and fuel recommended in the
engine manual or in the Specifications chart of
this manual.
6. Wear ANSI-approved safety goggles, heavy-duty work
gloves, and dust mask/respirator during set up.
Engine Precautions
Follow engine precautions and instructions in the included
engine instruction manual.
Operating Precautions
1.
CARbON MONOxIDE HAzARD
Using an engine indoors CAN KILL
YOU IN MINUTES.
Engine exhaust contains carbon
monoxide. This is a poison you cannot
see or smell.
NEVER use inside a home or garage, EVEN IF doors
and windows are open.
Only use OUTSIDE and far away from windows, doors,
and vents.
2. Keep children away from the equipment, especially
while it is operating.
3. Fire Hazard! Do not fill gas tank while Compressor
engine is running. Do not operate if gasoline has been
spilled. Clean spilled gasoline before starting engine.
Do not operate near pilot light or open flame.
4. Do not touch Compressor engine during use. Let
engine cool down after use.
5. Never store fuel or other flammable materials near
the Compressor engine.
6. Only use a suitable means of transport and lifting
devices with sufficient weight bearing capacity when
transporting the Compressor.
7. Secure the Compressor on transport vehicles to
prevent the tool from rolling, slipping, and tilting.
8. Industrial applications must follow OSHA requirements.
9. Do not leave the equipment unattended when it is
running. Turn off the equipment (and remove safety
keys, if available) before leaving the work area.
10. Wear ANSI-approved safety glasses, hearing
protection, and NIOSH-approved dust mask/respirator
under a full face shield along with steel-toed work boots
during use.
11. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to a heart pacemaker could cause
pacemaker interference or pacemaker failure. Caution
is necessary when near the engine’s magneto or
recoil starter.
12. Use only accessories that are recommended by Harbor
Freight Tools for your model. Accessories that may
be suitable for one piece of equipment may become
hazardous when used on another piece of equipment.
13. Do not operate in explosive atmospheres, such
as in the presence of flammable liquids, gases, or
dust. Gasoline-powered engines may ignite the dust
or fumes.
14. Stay alert, watch what you are doing and use common
sense when operating this piece of equipment. Do not
use this piece of equipment while tired or under the
influence of drugs, alcohol or medication.
15. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the equipment
in unexpected situations.
16. Dress properly. Do not wear loose clothing or jewelry.
Keep hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in
moving parts.
17. Parts, especially exhaust system components, get very
hot during use. Stay clear of hot parts.
18. Do not cover the engine or equipment during operation.
19. Keep the equipment, engine, and surrounding area
clean at all times.
20. Use the equipment, accessories, etc., in accordance
with these instructions and in the manner intended for
the particular type of equipment, taking into account the
working conditions and the work to be performed. Use
of the equipment for operations different from those
intended could result in a hazardous situation.
21. Do not operate the equipment with known leaks in the
engine’s fuel system.
22. This product contains or, when used, produces a
chemical known to the State of California to cause
cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5,
et seq.
)
23. When spills of fuel or oil occur, they must be cleaned
up immediately. Dispose of fluids and cleaning
materials as per any local, state, or federal codes
and regulations. Store oil rags in a bottom-ventilated,
covered, metal container.
Summary of Contents for 67853
Page 2: ......
Page 19: ...Page 17 For technical questions please call 1 800 444 3353 Item 67853 Pump Assembly Diagram...
Page 21: ...Page 19 For technical questions please call 1 800 444 3353 Item 67853 Tank Assembly Diagram...
Page 53: ...3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 520 0882 www harborfreight com...