background image

Page 18

For Engine technical questions, please call 1-800-520-0882.

Horizontal Engines

Warranties

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that 

its products meet high quality and durability standards, 

and warrants to the original purchaser that this product 

is free from defects in materials and workmanship for 

the period of 90 days from the date of purchase. This 

warranty does not apply to damage due directly or 

indirectly, to misuse, abuse, negligence or accidents, 

repairs or alterations outside our facilities, criminal activity, 

improper installation, normal wear and tear, or to lack of 

maintenance. We shall in no event be liable for death, 

injuries to persons or property, or for incidental, contingent, 

special or consequential damages arising from the use 

of our product. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the 

above limitation of exclusion may not apply to you. THIS 

WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE 

WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must 

be returned to us with transportation charges prepaid. Proof 

of purchase date and an explanation of the complaint must 

accompany the merchandise. If our inspection verifies the 

defect, we will either repair or replace the product at our 

election or we may elect to refund the purchase price if we 

cannot readily and quickly provide you with a replacement. 

We will return repaired products at our expense, but if we 

determine there is no defect, or that the defect resulted 

from causes not within the scope of our warranty, then you 

must bear the cost of returning the product.

This warranty gives you specific legal rights and you may 

also have other rights which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 6009   

Camarillo, CA 93011  •  (800) 520-0882

Emission Control System 

Warranty

United States Emission Control Defects  

Warranty Statement  

(for Model 68120)

The United States Environmental Protection Agency (herein EPA) 

and Harbor Freight Tools (herein HFT) are pleased to explain the emission 

control system warranty on your 1997 and later Small Off-Road Engine 

(herein engine).  Within the United States, new off-road, spark-ignition 

engines certified for model year 1997 and later, must be designed, built 

and equipped to meet the stringent anti-smog standards set forth by the 

EPA.  HFT must warrant the emission control system on your engine for 

the periods of time described below, provided there has been no abuse, 

neglect or improper maintenance of your engine.

Your emission control system may include parts such as the 

carburetor or fuel-injection system, and the ignition system. Also included 

may be hoses, belts, connectors and other emission-related assemblies.

Where a warrantable condition exists, HFT will repair your engine at 

no cost to you including diagnosis, parts and labor.

California and United States Emission Control Defects 

Warranty Statement  

(for Models 68306, 68121, and 68136)

The California Air Resources Board (herein CARB), the United 

States Environmental Protection Agency (herein EPA), and Harbor Freight 

Tools (herein HFT) are pleased to explain the emission control system 

warranty on your 1995 and later Small Off-Road Engine (herein engine). 

In California, the engine must be designed, built and equipped to meet 

the State’s stringent anti-smog standards.  Elsewhere within the United 

States, new off-road, spark-ignition engines certified for model year 1997 

and later, must meet similar standards set forth by the EPA.  HFT must 

warrant the emission control system on your engine for the periods of time 

described below, provided there has been no abuse, neglect or improper 

maintenance of your engine.

Your emission control system may include parts such as the 

carburetor or fuel-injection system, and the ignition system. Also included 

may be hoses, belts, connectors and other emission-related assemblies.

Where a warrantable condition exists, HFT will repair your engine at 

no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

The 1995 and later engines are warranted for two (2) years.  If any 

emission-related part on your engine is defective, the part will be repaired 

or replaced by HFT.

Summary of Contents for 67853






















































Reviews: