affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by
poorly maintained tools.
Never point any tool toward yourself or others.
Keep the exterior of the air compressor dry, clean,
and free from oil and grease.
Always use a clean
cloth when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents to
clean the unit. Following this rule will reduce the risk of
deterioration of the enclosure plastic.
SERVICE
Tool service must be performed only by qualified
repair personnel.
Service or maintenance performed
by unqualified personnel may result in a risk of injury.
Disconnect power supply, open drain valve to
decompress tank and allow water to drain, and
allow air compressor to become cool to the touch
before servicing.
Turn pressure regulator knob fully
counter clockwise after shutting off compressor.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual.
Use of
unauthorized parts or failure to follow Maintenance
instructions may create a risk of injury.
GENERAL
Do not remove or paint over any DANGER!,
WARNING!, CAUTION!
, or instructional materials
attached to the compressor.
If for any reason any part of the manual becomes
illegible or the manual is lost, have it replaced
immediately.
The instruction manual should be read
periodically to refresh one’s memory.
GENERAL SAFETY RULES
Page 4
For technical questions, please call 1-888-866-5797.
Item 68066
