SKU 94275
For technical questions, please call 1-800-444-3353.
PAGE 18
TROUBLESHOOTING
Problem
Possible Solution
Dust Reclaimer does not turn on.
Make sure the Power Switch (25) on is in
1.
its “ON” position.
Make sure the Power Cord Plug of the
2.
Dust Reclaimer is properly connected to
a working, 115 volt, grounded, electrical
outlet.
Have a qualified service technician
3.
check out the Dust Reclaimer and Blast
Cabinet.
Poor visibility within the Blast Cabinet.
Check to make sure Dust Reclaimer is
1.
on.
Dust Reclaimer is filled. Empty and
2.
clean out Dust Reclaimer.
Filter in Dust Reclaimer needs to be
3.
cleaned or replaced.
Check to make sure there is no clogging
4.
in the Wire Mesh Reinforced Hose.
Have a qualified service technician
5.
check out the Dust Reclaimer and Blast
Cabinet.
A. Make sure the Power Cord Plug (12) of the Dust Reclaimer is un-
plugged from
its electrical outlet. (See Assy. Diagram.)
B. Remove the Radiating Guard (1) from the top of the Dust Reclaimer.
(See Assy. Diagram.)
C. Remove the Filter (18), and clean with compressed air.
(See Assy. Diagram.)
D. Replace the Filter (18) and Radiating Guard (1). (See Assy. Diagram.)
07h
