SKU 94724
For technical questions, please call 1-800-444-3353.
Page 11
AIR
OUTLET
VALVE
(48)
CONNECT
AIR HOSE HERE.
CLOSED POSITION
OPEN POSITION
FIGURE E
TOP VIEW
OIL FILL
CAP
(11)
OIL SIGHT
GAUGE
(19)
KEEP OIL LEVEL
EVEN WITH
RED DOT
FIGURE D
the horizontal line as shown on the Oil Sight Gauge (19). If the level of oil is
below the horizontal line, carefully
unscrew
and remove the Oil Fill Cap (11) and
add new oil through the Oil Fill hole.
Make sure not to overfill.
Then screw in
the Oil Fill Cap, being careful not to strip the threads. (See
Figure D.)
2.
Turn the Air Outlet Valve (48) to its
CLOSED
position. Then connect a high
pressure air hose (not included) equipped with a
quick connector to the Air Outlet
Valve. If using a water filter and oiler in series with the Air Outlet Valve of the Air
Compressor, connect the other end of the air hose to the water filter and oiler and
connect the water filter and oiler to the air tool being used. If
not
using a water
filter and oiler, squirt several drops of air tool oil into the air intake plug of the air
tool. Then, connect the other end of the air hose directly from the Air Outlet Valve
of the Air Compressor to the air tool.
(See Figure E, and Figure F, next page.)
