background image

Page 3

For technical questions, please call 1-800-444-3353.

SKU 95275 

        

REV 10b, 10c

parts.  

Damaged or entangled cords 

increase the risk of electric shock.

Personal safety

3. 

Stay alert, watch what you are 

a. 

doing and use common sense when 

operating this compressor.  do 

not use this compressor while you 

are tired or under the influence of 

drugs, alcohol or medication.

  A 

moment of inattention while operating 

a compressor may result in serious 

personal injury.

use personal protective equipment.  

b. 

Always wear ANSI-approved eye 

protection during setup and use.
Prevent unintentional starting. 

c. 

Ensure the switch is in the off-

position before connecting to power 

source or moving the compressor.

  

Compressor use and care

4. 

do not use the compressor if the 

a. 

switch does not turn it on and 

off.

  Any compressor that cannot be 

controlled with the switch is dangerous 

and must be repaired.

disconnect the plug from the 

b. 

power source before making any 

adjustments, changing accessories, 

or storing the compressor.

  Such 

preventive safety measures reduce 

the risk of starting the compressor 

accidentally.

Store an idle compressor out of 

c. 

the reach of children and do not 

allow persons unfamiliar with the 

compressor or these instructions to 

operate it.

  A compressor is dangerous 

in the hands of untrained users.

Maintain the compressor.  Keep 

d. 

the compressor clean for better 

and safer performance.  Follow 

instructions for lubricating and 

changing accessories.  Keep dry, 

clean and free from oil and grease.  

Check for misalignment or binding 

of moving parts, breakage of parts 

and any other condition that may 

affect the compressor’s operation.  

If damaged, have the compressor 

repaired before use.

  Many accidents 

are caused by a poorly maintained 

compressor.

use the compressor in accordance 

e. 

with these instructions, taking into 

account the working conditions and 

the work to be performed.

  Use of 

the compressor for operations different 

from those intended could result in a 

hazardous situation.

Service

5. 

Have your compressor serviced by 

a. 

a qualified repair person using only 

identical replacement parts.

  This will 

ensure that the safety of the compressor 

is maintained.

Air Compressor Safety Warnings

Risk of fire or explosion - do not spray 

1. 

flammable liquid in a confined area 

or towards a hot surface.

 Spray area 

must be well-ventilated. Do not smoke 

while spraying or spray where spark or 

flame is present. Arcing parts - keep 

compressor at least 20 feet away from 

explosive vapors, such as when spraying 

with a spray gun.

Risk of bursting - do not adjust 

2. 

regulator higher than marked 

maximum pressure of attachment.
Risk of injury - do not direct air 

3. 

stream at people or animals.
do not use to supply breathing air. 

4. 

do not leave compressor unattended 

5. 

for an extended period while plugged 

in. 

 Unplug compressor after working.

Summary of Contents for 95275

















Reviews: