SKU 95386
For technical questions, please call 1-800-444-3353.
Page 12
3.
Make sure the Drain Valve (65) is closed.
(See Figure G.)
4.
Make sure the “On/Off” Pressure Switch (55) is
DOWN
in its
OFF
position. Then,
plug the Power Cord (64) into the nearest 120 volt, grounded, electrical outlet.
(See Figure H.)
5.
Pull
UP
on “On/Off” Pressure Switch (55) to start the Compressor.
(See Figure H.)
6.
Allow the Compressor to build up from 80 PSI to 115 PSI as indicated on the Tank
Pressure Gauge (54). Set the appropriate air pressure output for the air tool being
used. Pull out and then turn the pressure adjustment knob above the Outlet
Pressure Gauge (60) to the left to increase output air pressure or to the right to
decrease output air pressure. Once the pressure level reaches the recommended
ON/OFF
PRESSURE
SWITCH (55)
AIR OUTLET
VALVE (63)
FIGURE H
DRAIN
VALVE (65)
Figure G
TANK
PRESSURE
GAUGE (54)
OUTLET
PRESSURE
GAUGE
(60)
