SKU 95386
For technical questions, please call 1-800-444-3353.
Page 14
WARRANTY
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that for a period of one year from date of purchase that the tank is free of
defects in materials and workmanship. Harbor Freight Tools also warrants to the original purchaser, for a period
of ninety days from date of purchase, that all other parts and components of the product are free from defects in
materials and workmanship. This warranty does not apply to damage due directly or indirectly to misuse, abuse,
negligence or accidents; repairs or alterations outside our facilities; or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential
damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection
verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
LIMITED 1 YEAR/
90 DAY WARRANTY
INSPECTION AND MAINTENANCE
1.
WARNING!
Always unplug the Air Compressor from its electrical outlet
before performing any inspection, maintenance, or cleaning.
2.
Before each use:
Inspect the general condition of the Air Compressor. Check for
misalignment or binding of moving parts, cracked or broken parts, damaged
wiring, damaged air hose, and any other condition that may affect its safe
operation. If abnormal noise or vibration occurs, have the problem corrected
before further use.
Do not use damaged equipment.
3.
Daily, before switching the compressor on:
Make sure the level of compressor
oil is adequate. For instructions on checking and, if necessary, filling the Air
Compressor with oil,
see pages 10 and 11 of this manual.
4.
Daily:
Purge the Tank (1) daily of all air and moisture to prevent corrosion. To do
so, unscrew the Drain Valve (65) two to three turns.
Do not unscrew the Drain
Valve more than three turns.
When all the air pressure and moisture is released
from the Tank, retighten the Tank Drain Valve.
(See Figure G.)
5.
Store the Air Compressor in a clean, dry, location.
