background image

Page 6

SKU 96496

For technical questions, please call 1-800-444-3353.

Never stand on the Air Compressor.  Serious injury could result if the Compressor 

is tipped.
Never leave the Air Compressor unattended when it is plugged in and running.  

Turn off the Compressor, and unplug the unit before leaving.
Do not allow children and other unauthorized people to handle or play with the Air 

Compressor.
Do not modify the factory set pressure shutoff or startup switches.   This tool will 

do the work better and safer at the speed and capacity for which it was designed.
Avoid body contact with oils and lubricants used in the Compressor.  if 

swallowed, seek medical treatment immediately.  For skin contact, immediately 

wash with soap and water.  For eye contact, immediately flush eyes with clean 

water.

WARNING:

  The brass components of this product contain lead, a chemical 

known to the State of California to cause birth defects (or other reproductive 

harm). (California Health & Safety code § 2249., 

et seq.

)

WARNING:  

The warnings and precautions discussed in this manual cannot 

cover all possible conditions and situations that may occur.  it must be 

understood by the operator that common sense and caution are factors which 

cannot be built into this product, but must be supplied by the operator.

SAVE tHESE INStRuCtIONS.

GROuNdING

                        Improperly connecting the grounding wire can result in           

                        electric shock.

                        Check with a qualified electrician if you are in doubt as to    

                        whether the outlet is properly grounded.  do not modify the         

                        power cord plug provided with the tool.  Never remove the      

                        grounding prong from the plug.  do not use the tool if the  

                        power cord or plug is damaged.  If damaged, have it repaired  

                        by a service facility before use.  If the plug will not fit the out- 

                        let, have a proper outlet installed by a qualified electrician.

 

Grounded tools: tools with three Prong Plugs

Tools marked with “Grounding Required” have a three wire cord and three prong 

grounding plug.  The plug must be connected to a properly grounded outlet.  if 

the tool should electrically malfunction or break down, grounding provides a low 

14.

1.

16.

17.

1.

19.

20.

1.

WARNING

Summary of Contents for 96469
















Reviews: