background image

SKU 98635 

For technical questions, please call 1-800-444-3353. 

Page 4

dangerous in the hands of untrained 

users.

Maintain power tools.  Check for 

e. 

misalignment or binding of moving 

parts, breakage of parts and any 

other condition that may affect the 

power tool’s operation.  If dam-

aged, have the power tool repaired 

before use.

  Many accidents are 

caused by poorly maintained power 

tools.

use the power tool and acces-

f. 

sories in accordance with these 

instructions, taking into account 

the working conditions and the 

work to be performed.  

Use of the 

power tool for operations different 

from those intended could result in a 

hazardous situation.

Service

5. 

Have your power tool serviced by 

a. 

a qualified repair person using 

only identical replacement parts.  

This will ensure that the safety of the 

power tool is maintained.

Compressor Safety Warnings

Maintain labels and nameplates on 

1. 

the Compressor.  These carry impor-

tant safety information.  If unreadable 

or missing, contact Harbor Freight 

Tools for a replacement.
Avoid unintentional starting.  Prepare 

2. 

to begin work before turning on the 

Compressor.
Do not leave the Compressor unat-

3. 

tended when it is plugged into an 

electrical outlet.  Turn off the Com-

pressor, and unplug it from its electri-

cal outlet before leaving.

This product is not a toy.  Keep it out 

4. 

of reach of children.
People with pacemakers should 

5. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone.

 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any power cord must be properly 

grounded.  Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained elec-

trical shock.
WARNING: Handling the cord on 

6. 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and birth 

defects or other reproductive harm. 

Wash hands after handling.  (Califor-

nia Health & Safety Code §  25249.5, 

et seq.)
WARNING:  This product contains 

7. 

brass, which is a chemical known to 

the State of California to cause can-

cer and birth defects and other repro-

ductive harm.  (California Health & 

Safety Code § 25249.5, et seq.)
CAUTION:  Your Warranty is voided 

8. 

if:

You do not put compressor oil in the 

a. 

Compressor’s crankcase prior to its 

first use.  Before each use, check 

the oil level.  Never run the Com-

pressor with low or no compressor 

oil.  Running the Compressor with 

Summary of Contents for 98635

















Reviews: