SKU 99659
For technical questions, please call 1-800-444-3353.
Page 5
ing air.
For any application of air for
human consumption, you must fit the
Air Compressor with suitable in-line
safety and alarm equipment (not in-
cluded). This additional equipment is
necessary to properly filter and purify
the air to meet minimal specifications
for Grade D breathing as described in
Compressed Gas Association Com-
modity Specification G 7.1-1966,
OSHA 29 CFR 1910. 134, and/or
Canadian Standards Associations
(CSA). In the event the Air Compres-
sor is used for the purpose of breath-
ing air application and proper in-line
safety and alarm equipment is not
simultaneously used, existing war-
ranties are void, and Harbor Freight
Tools disclaims any liability whatso-
ever for any loss, personal injury, or
damage.
do not use Compressor continu-
4.
ously for over 15 minutes.
Allow
the Compressor to cool approximate-
ly
12 to 15 minutes
after inflating an
item.
Do not overinflate objects.
5.
Check
pressure continually while inflating.
Use tire pressure gauge to check the
actual pressure in the item inflated.
Do not inflate any item over or under
its manufacturer’s recommended PSI
rating.
Make sure all inflatable items used
6.
with Air Compressor are inflated to
the appropriate capacity. Inflatable
items constructed of soft materials
(balls, beach toys, air mattresses,
rubber rafts, etc.) usually will not
show the manufacturer’s recom-
mended air pressure. Take care not
to over-inflate the object.
Replace fuse only with another 20
7.
amp glass tube fuse.
Connect only
to 12V negative ground circuit.
Avoid burns. After several minutes of
8.
use, Compressor will become hot to
the touch. Always wear heavy duty
safety gloves when during use.
do not point the nozzle (28) at
9.
skin, other people or animals.
Make sure the Air Compressor is
10.
located on a flat, level, sturdy surface
capable of supporting the weight of
the Compressor.
Industrial applications must follow
11.
OSHA guidelines.
Never leave the Air Compressor unat-
12.
tended when it is plugged in and run-
ning. Turn off the Compressor, and
unplug the unit before leaving.
Do not allow children and other unau-
13.
thorized people to handle or play with
the Air Compressor.
Do not modify the factory set pres-
14.
sure shutoff or startup switches.
This tool will do the work better and
safer at the speed and capacity for
which it was designed.
WARnIng!
15.
The brass components
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5,
et seq.
)
Only use with accessories rated to
16.
handle forces exerted by tool during
operation. Other accessories not de-
signed for the forces generated may
break and forcefully launch pieces.
