Page 2
SKU 47407
for technical questions, please call 1-800-444-3353.
reV 02/04; 11/04; 02/05; 07/06; 01/07
Specifications
Power Requirement
120 V~, 2.2 A
Tank Capacity
2 gallon, 0.3 SCFM @ 90 PSI; 0.58 SCFM @ 40
PSI
Pressure Switch
Cut-in at 73 PSI; shuts off automatically at 100 PSI
(150 sec. on, 350 sec. off)
Piston Diameter
30 mm
Air Outlet
1/4 inch, 18 NPT
Pressure Tank Gauge
0 ~ 150 PSI x 1-3/4 inch diameter
Regulator Gauge
0 ~ 150 PSI x 2 inch diameter
Power Cord
78 inches; 3-prong plug
Air Hose
25 foot, coil with chuck
Features
Oil-less, direct drive, thermal overload protection;
carrying handle; light weight and portable;
Uses: airbrush, inflating tires and toys, nail gun
Accessories
Blow gun with tips, tire chuck
Weight
20 lb.
Save this manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety warnings and Precautions
warnInG: when using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
read all instructions before using this tool!
1.
Keep work area clean
. Cluttered areas invite injuries.
2.
observe work area conditions
. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment
. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
use the right tool for the job
. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
