background image

SKU 99901 

For technical questions, please call 1-800-444-3353. 

Page 5

sPeCiFiCations

Maximum Input  

Pressure

150 PSI

CO

2

 Inlet

1/2” -14 TPI

CO

2

 Bottle Size

Standard 20 Oz. size with 

1/2” x 14 TPI Thread

Hose Fittings

Female Quick Connectors

unPaCking

When unpacking, check to make sure 

that the item is intact and undamaged.  If 

any parts are missing or broken, please 

call Harbor Freight Tools at the number 

shown throughout the manual as soon as 

possible.

This product may be shipped with a 

• 

protective plug covering the air inlet/

outlet.  Remove this plug before set 

up.

oPeration

  read the entire imPortant 

saFetY inFormation 

section at the beginning of this 

manual including all text under 

subheadings therein before set 

up or use of this product.

 

to PreVent 

serious injurY 

and deatH: 

the work, setup, and storage 

areas must all be well 

ventilated. Co

2

 is an invisible 

odorless gas which can cause 

serious injury or death if it 

accumulates.

 

to PreVent 

exPlosion: 

use only clean, dry, bottled, 

compressed Co

2

 with this 

regulator.  do not use oxygen 

or any other gas.
 

to PreVent 

serious injurY: 

do not adjust any control or 

component in a way not 

specifically explained within 

this manual.  improper 

adjustment can result in 

regulator failure or other 

serious hazards.

Regulator Control Knob

Output Gas Pressure Dial

Female Hose 

Quick Connector

Belt Hook

1.  Close the Regulator Control Knob 

completely by turning it counterclock-

wise.

REV 09c

Summary of Contents for PROFESSIONAL 99901









Reviews: