background image

2

2

   

These symbols are intended to alert the user to the presence of  

important  operating  and  maintenance  instructions  in  the  manual 

accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the  

manufacturer of all liability.
Star reserves the right to change specifications and product design without 

notice.  Such revisions do not entitle the buyer to corresponding changes,  

improvements, additions or replacements for previously purchased  

equipment.
Due to periodic changes in designs, methods, procedures, policies and  

regulations, the specifications contained in this sheet are subject  to change 

without notice.  While Star International Holdings Inc., Company exercises 

good faith efforts to provide information that is accurate, we are not 

responsible for errors or omissions in information provided or conclusions 

reached as a result of using the specifications.  By using the information 

provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.   

Please record the model number, serial number, voltage and purchase date in the area below and have it ready when  

you call to ensure a faster service. 

 

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business  

8:00 am to 4:30 p.m. Central Standard Time 

Hours:

 

Telephone:

 

(800) 264-7827

Fax: 

 

(314) 781-2714

E-mail

   

Parts@star-mfg.com

                  

Service@star-mfg.com

                 

Warranty@star-mfg.com

Website:

        

www.star-mfg.com     

   

Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit
 

or

for an updated listing go to:

Website:

        

www.star-mfg.com     

E-mail

   

Service@star-mfg.com 

Mailing Address:

    Star International Holdings Inc., Company 

  U.S.A  

CAUTION

WARNING

265 Hobson St.

Smithville, TN 37166

Summary of Contents for CPGM24













Reviews: