12
7. Battery Replacement Procedure
The DC UPS is designed with an easy-access battery cover.
STEP 1
Turn off power switch. Disconnect the DC UPS from power and any connected
devices. Remove the battery door on the front of the DC UPS by pulling up the battery door.
STEP 2
Remove the battery from enclosure; remove the wire connections from the battery.
STEP 3
Connect the new battery (black-to-black, red-to-red); place the battery into the
enclosure, and then put the wires next by the battery inside of the closure as shown bellow.
WARNING: Connect the correct color wires carefully to the corresponding terminals. The
battery has two color-coded terminals (red = +, black = -) as well as the two colors of the
wires. Misconnect the two wires to wrong terminals might cause battery explosion.
Summary of Contents for DC UPS
Page 1: ...DC UPS User Manual ...
