9
4.2 Wall-Mounting Instructions (Optional)
NOTE: Required hardware not included. Refer to the wall-mount instructions for required
tools and materials.
STEP 1: Make a mark on the wall in the 2 screw locations. The distance between the
centers of the 2 screws are 80cm.
STEP 2: Use a drill to drill holes where you made the mark on the wall. If you drill into a wall
stud, proceed to Step 5. If not, go to Step 4.
STEP 3: Insert anchor(s) into the hole(s).
STEP 4: Screw in the screw, leaving it protruding
1⁄4 inch from the wall.
STEP 5: Mount the DC UPS on the screw heads. Mounting holes
120mm
358mm
80mm
Mounting holes
Summary of Contents for DC UPS
Page 1: ...DC UPS User Manual ...