background image

Page 2

For technical questions, please call 1-800-444-3353.

SKU 68064 

        

CONTENTS

IMPORTANT SAFETY 

INFORMATION ............................ 3

GENERAL COMPRESSOR 

SAFETY WARNINGS.......................3

AIR COMPRESSOR SAFETY 

WARNINGS ......................................5

GROUNDING ................................. 6

110-120 V~ GROUNDED 

COMPRESSORS: 

COMPRESSORS WITH THREE 

PRONG PLUGS ...............................6

SYMBOLOGY .....................................7

SPECIFICATIONS .......................... 8
UNPACKING .................................. 8
INSTRUCTIONS FOR PUTTING 

INTO USE .................................... 8

FUNCTIONS .......................................8
WORK PIECE AND WORK AREA 

SET UP ............................................9

ASSEMBLY.........................................9
SET UP ...............................................9
CHECKING THE OIL ........................10

GENERAL OPERATING 

INSTRUCTIONS ........................ 11

EMERGENCY 

DEPRESSURIZATION ...................12

AUTOMATIC SHUT OFF SYSTEM ..12

MAINTENANCE AND 

SERVICING ............................... 13

CLEANING, MAINTENANCE, AND 

LUBRICATION ...............................13

MAINTENANCE SCHEDULE ...........13
OIL MAINTENANCE .........................14

DRAINING MOISTURE FROM THE 

TANK ..............................................14

AIR FILTER MAINTENANCE ...........15
TROUBLESHOOTING ......................16

PARTS LIST ................................. 18
ASSEMBLY DIAGRAM ................ 19
LIMITED 1 YEAR / 90 DAY 

WARRANTY .............................. 20

Summary of Contents for CentralPneumatic 68064





















Reviews: