background image

Page 3

For technical questions, please call 1-800-444-3353.

SKU 68064 

        

SAVE THIS MANUAL

Keep this manual for the safety 

warnings and precautions, assembly, 

operating, inspection, maintenance and 

cleaning procedures.  Write the product’s 

serial number in the back of the manual 

near the assembly diagram (or month 

and year of purchase if product has no 

number).  Keep this manual and the 

receipt in a safe and dry place for future 

reference.

IMPORTANT SAFETY 

INFORMATION

In this manual, on the labeling, 

and all other information 

provided with this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

DANGER indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 WARNING 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

CAUTION, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.
 

NOTICE is used to 

address practices 

not related to personal injury.
 

CAUTION, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

General Compressor Safety 

Warnings

 WARNING Read all safety 

warnings and instructions. 

Failure to follow the warnings and 

instructions may result in electric 

shock, fire and/or serious injury.   

Save all warnings and 

instructions for future reference.

1. 

Work area safety

a. 

Keep work area clean and well 

lit.  

Cluttered or dark areas invite 

accidents.

b. 

Do not operate the Compressor in 

explosive atmospheres, such as in 

the presence of flammable liquids, 

gases or dust.  

Compressor motors 

produce sparks which may ignite the 

dust or fumes.

c. 

Keep children and bystanders 

away from an operating 

compressor. 

2. 

Electrical safety

a. 

Compressor plugs must match 

the outlet.  Never modify the 

plug in any way.  Do not use any 

adapter plugs with a grounded 

compressor.  

Standard plugs and 

Summary of Contents for CentralPneumatic 68064





















Reviews: