Centrometal CentroPelet ZS10, Technical Instructions

Carefully read the precautions and follow the procedures correctly.

WARNING! 

Do not try to install the stove;

Always contact authorized and trained personnel.

- In case of breakage or poor functioning always contact the Authorized Assistance Centre; 

any attempt to remove parts or perform maintenance on the device can expose the user to electrical 
shock danger. The stove contains parts whose maintenance must be done by the Authorized Assistance 
Centre.

- The stove is a heating device; 

its parts reach extreme temperatures and contact without adequate 

protection can provoke burns of various degrees. 

  Pay particular attention to children.

- In case of a transfer, contact the Authorized Assistance Centre for the removal and new installation.
- Do not insert fingers or other objects in the air flow exit slits. 

Inside the device there is a high speed fan that could cause grave personal injury. Pay particular attention 
to children.

- Do not remain for long periods directly exposed to the flow of hot air.

Direct and prolonged exposition to the cold air could be hazardous to health. Pay particular attention in 
rooms where there are children, the elderly or the ill.

- In case the stove functions poorly, shut down the device immediately, unhook the appropriate 

automatic switch and contact the Authorized Assistance Centre.  

The continued use of the device 

in said conditions can cause fires or flashes.

- If you do not use the auxiliary air outlet (only for models with canalisation), check that the fan speed is set 

on zero (deactivated).

WARNING!  

- During the stove installation operation, keep children out of the work area to avoid unforeseen 

accidents.

-  Do not block or cover in any way the body of the stove or obstruct the slits placed on the upper 

side.

Obstructing said slits can cause fires.

-  Do not use the stove in areas containing precision devices or works of art.

The quality of the conserved objects may deteriorate.

-  Do not expose animals or plants to direct air flow from the unit.

Prolonged direct exposition to the flow of air from the stove can have negative effects on plants and 

animals.

-  Occasionally ventilate the room during the use of the device.

Insufficient ventilation can be the origin of insufficient oxygen in the room.

-  Do not expose the stove to contact with water.

The  electrical  insulation  could  be  damaged,  with  the  consequent  possibilities  of  electrocution  and 

breakage due to the thermal extremes.

-  Verify the installation conditions to locate eventual damage.

After the stove has completed 900 hours of operation (the lower screen will read “SErV”), contact the 

Authorized Assistance Centre for cleaning and ordinary maintenance.

-  Do not use inflammable gas near the stove.

-  Unhook the automatic switch if the device will not be used for long periods of time.
- 

We check the start up of all our stoves.