manualshive.com logo in svg

CENTROTHERM E1200 HT 260-3, Operating Instructions Manual

The CENTROTHERM E1200 HT 260-3 is a cutting-edge product designed to meet your heating needs. With its innovative features and user-friendly interface, this device ensures optimal performance. To familiarize yourself with its operation, download the comprehensive Operating Instructions Manual for free from our website - 88.208.23.73:8080.

Share
Download
background image

E1200 HT 260-3 

Index 

 

23.04.07

 

00401010_41087

 

G 

gas cabinet................................................ 4-13 

H 

handling stop......................................3-4, 4-18 
heating zone ............................................... 4-7 
horizontal furnace ....................................... 4-6 

heating cassette ..............................4-6, 4-7 
cooling system........................................ 4-9 
process tube........................................... 4-8 
tube closure............................................ 4-8 
back flange ............................................. 4-8 

horn..................................................4-16, 8-13 

I 

information field........................................... 8-5 
installation site ............................................ 6-1 

J 

job list.......................................................... 8-6 

L 

laminar flow box .......................................... 4-5 
liability ......................................................... 1-5 
lift   .............................................................. 4-4 
list of figures................................................. 17 
loading box.................................................. 4-3 
loading machine.......................................... 4-5 
loading process........................................... 4-3 
loading station............................................. 4-2 
loading trolley.............................................. 4-4 
login/logout button....................................... 8-3 

M 

main power switch .............................3-3, 4-15 
manipulating variable of the heating zone .. 8-7 
manual operation ........................................ 8-4 
manual/auto switch ................................... 4-18 
means of transport ...................................... 5-2 
media supply connection ............................ 2-1 

exhaust air removal ................................ 2-2 
compressed air....................................... 2-2 
electricity ................................................ 2-2 
cooling water .......................................... 2-1 
oxygen.................................................... 2-2 
nitrogen .................................................. 2-2 

N 

navigation bar ....................................4-20, 8-5 

O 

online help................................................... 8-5 

operating company ..................................... 1-4 
operating instruction remarks ..................... 1-1 
operating panel......................................... 4-18 
operating personnel............................. 1-4, 8-1 
operation 

alarm handling ..................................... 8-13 
startup .................................................. 8-10 
shutdown.............................................. 8-11 
process capability ................................ 8-12 
responding to an alarm ........................ 8-14 

oxidation ..................................................... 2-5 

P 

packaging ................................................... 5-1 
paddle......................................................... 4-5 
PECVD ....................................................... 2-6 
plasma enhanced chemical vapor deposition .. 2-6 
POCl3 ....................................................... 3-10 
port ............................................................. 4-3 
power supply unit...................................... 4-15 
precipitation container ............................ 10-15 
preventive maintenance interval............... 10-5 

every eight weeks .............................. 10-25 
semi-annual ....................................... 10-27 
monthly .............................................. 10-22 
process dependant ............................ 10-42 
daily...................................................... 10-7 
every four years ................................. 10-41 
quarterly ............................................. 10-26 
weekly .................................................. 10-8 
every two weeks ................................ 10-14 

process boat ................................. 2-3, 4-3, 4-5 
process capability ....................................... 8-7 
process overview........................................ 2-5 
process sequence 

diffusion................................................ 4-23 
LPCVD ................................................. 4-24 
oxidation............................................... 4-23 
PECVD................................................. 4-24 
annealing ............................................. 4-23 

process tube status .................................... 8-8 
process tube ........................................ 2-4, 8-7 
process ..................................................... 4-23 
pushbutton................................................ 4-18 

Summary of Contents for E1200 HT 260-3










































































































































































































































Reviews:

No comments

Related manuals for E1200 HT 260-3

Lennox G60UHV(X) series User'S Information Manual preview
G60UHV(X) series
Brand: Lennox Pages: 6
Napoleon 9700 SERIES Installation And Operating Instructions Manual preview
9700 SERIES
Brand: Napoleon Pages: 77
SummerAire OLM SERIES User Manual preview
OLM SERIES
Brand: SummerAire Pages: 4
Lennox G20 Series User'S Information Manual preview
G20 Series
Brand: Lennox Pages: 6
Hastings HR SERIES Installation And Service Manual preview
HR SERIES
Brand: Hastings Pages: 31
COZY DVCF403C-H Installation And Operating Instructions Manual preview
DVCF403C-H
Brand: COZY Pages: 73
ICP AMP105-IE2 Installation Instructions And Homeowner'S Manual preview
AMP105-IE2
Brand: ICP Pages: 64
COMFORT-AIRE ODF Series Installation And Operation Manual preview
ODF Series
Brand: COMFORT-AIRE Pages: 20
COMFORT-AIRE GUH97M Service Manual preview
GUH97M
Brand: COMFORT-AIRE Pages: 70
Bard WG241 Installation Instructions Manual preview
WG241
Brand: Bard Pages: 73
VERDER CARBOLITE GERO CWF 12/23 Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO CWF 12/23
Brand: VERDER Pages: 36
Williams 2509821 Owner'S Manual preview
2509821
Brand: Williams Pages: 40
Thermo Pride OH16-125 Operation Manual preview
OH16-125
Brand: Thermo Pride Pages: 18
Thermo Pride OH5-85DXE Installation And Operation Manual preview
OH5-85DXE
Brand: Thermo Pride Pages: 17
Thermo Pride OD6FA072D48 Installation, Operation And Service Manual preview
OD6FA072D48
Brand: Thermo Pride Pages: 43
Thermo Pride CMA1-50N Installation And Service Manual preview
CMA1-50N
Brand: Thermo Pride Pages: 55
Thermo Pride CLQS1-050T36N Installation And Operation Manual preview
CLQS1-050T36N
Brand: Thermo Pride Pages: 65
Thermo Pride OMC-70 Specification preview
OMC-70
Brand: Thermo Pride Pages: 4

Brands by name

Popular brands

Load more brands