Do not use this product with supply voltages greater
than 30v ac or 40v dc.
For your convenience you will find an Address Register included in
your
SMARTGUARD
packaging. Use this Address Register to record
which addresses have been assigned, their access code and which
channel will be activated by that address.
The supplied Address Register will record the first 500 addresses, from
0 to 499. Should you require a second Address Register to record the
next 500 address, i.e. address 500 to 999, please contact your
nearest CENTURION SYSTEMS branch or distributor.
Keep the address register in a safe place!
20. Important installation information
19. Glossary of terms
Access code
The code number the user will enter to gain access. It can range
in length from one to ten digits.
Address/ User address
The location where the user’s code is stored in the keypad
memory. It can be any number between 1 and 999.
It should be recorded, allowing the user code to be removed
from the memory later if necessary.
Master Code
The code number required for programming the keypad.
It is stored in user address 0.
The default Master Code of a new unit is
For security reasons, the installer should change
this code at the time of installation.
Refer to Section 7 for instructions on how to change
the Master Code.
3 4
1 2
Enter key
In order to gain access, the user code must be followed by a .
#
#
Complete the installation information below for future reference.
Master Code
Channel 1 activates
Channel 2 activates
Channel 3 activates
Channel 4 activates
Channel 5 activates
Channel 6 activates
Channel 7 activates
Channel 8 activates
Channel 9 activates
Channel 10 activates
Channel 11 activates
Channel 12 activates
Channel 13 activates
Channel 14 activates
Channel 15 activates
Keep this manual in a safe place.
Installers information:
Name:
Mobile number:
Email address:
Physical address:
