the previously programmed ON and OFF times will
be separately postponed by 2-32 minutes. (Fig 15)
Press the
buttons again to turn
off the random function.
“
DAY
” and “
HOUR
”
Fig 15
F.
DST - DAYLIGHT SAVING TIME FUNCTION
Press
HOUR
&
MIN
simultaneously to activate or deactivate
DST
Note: A small clock symbol “ ” will appear on the far right of the LCD
screen when DST is active. (Fig 17)
(Fig 16) DST OFF
(Fig 17) DST ON
(Fig 18) DST OFF
It means manually adding 1hour to open the Summer Time , otherwise
it returns to current time. (Fig 18)
“
”
G.
TROUBLESHOOTING
Timer does not turn on or off.
a. Make sure AM and PM are correct on the current time and in the
program settings.
b. Timer program should be on AUTO setting.
c. Make certain that both an ON and OFF time have been specified.
d. If the screen display is not clear or is blank, please replace the battery
located in the backside of the timer, then reset the timer.
e. The 2 grounded outlets are controlled by the same programs, they can
not be set by different programs.
f. If the timer can not turn ON or turn OFF on time, please check if the
Random function is active.
g. If the timer is always ON or always OFF, please check if the program
is in Auto mode.
www.centurytimer.com
(909)592-1881 M-F 9AM – 5PM PST
support@centurytimer.com
3545 Granada Ave. El Monte, CA 91731
Designed in California, Made in China
