Radikal Gasser
Page 12
HEAD ASSEMBLY (LT VERSION)
Slide the washout guide and the rotor head onto
the main shaft. Insert the M3X18 shoulder
socket cap screw through the rotor head
hub and main shaft and secure with one
M3 locknut, torque down the screw. Apply
Medium threadlock to the M2.5x8 sock-
et cap screws and tighten into the bot-
tom of the rotor head block to clamp
against the main shaft, do not over-
torque. Position the washout guide
against the collar and align one
hole to the vertical slot in the rotor
head. Apply Medium threadlock to
the M3x4 set screws and evenly
tighten set screws in place.
CNM2.5x8CS
CNM3LOCK
CNM3x18CS
CNM3x4SS
1
2
3
4
5
6
HW3053B
2
CNM2.5x8CS
Cap Screw(
杯头内六角螺丝
)M2.5x8
1
M3 Locknut(
防松螺母
)
CNM3LOCK
1
Cap Screw(
杯头内六角螺丝
)M3x18
CNM3x18CS
1
Main Shaft(
主旋翼轴
)
2
Set Screw(
无头内六角螺丝
)M3x4
CNM3x4SS
1
CNC Washout Guide(
剪型臂滑座
)
HI6153
No.
Description
Qty
1
2
3
4
6
5
Part #
BAG 1
Do not apply CA or
thread lock to lock nut
Do not over-tighten!