Buckle:
3-Point Models
• To buckle: Push tongue down into slot.
Pull up on tongue to be sure it is locked.
• To unbuckle: Press red button and pull
tongue out.
5-Point Models
• To buckle: Insert both tongues into
buckle. Pull up on tongues to be sure
they are locked.
• To unbuckle: Press red button and pull
tongues out.
Removing Car Seat from Base:
• Place handle in
“locked”
upright carrying
position.
• Squeeze red release lever in base
(fig. a)
.
• Lift car seat out of base.
Adjustable Base:
• Pull blue adjustment
Handle
out
(fig. b)
.
• Adjust
Foot
to desired position.
• Release adjustment handle. Be sure it
retracts into slot.
2-Piece Harness Tie:
• To open: Squeeze tabs and pull apart.
• To close: Snap halves together. Make
sure harness tie is locked by pulling out
on each half.
Adjustable Handle:
• Handle has four adjustment positions.
• Push in red buttons on each side of
handle, rotate and release red buttons.
Continue rotating handle to desired
position until you hear a
“click”
sound.
•
IMPORTANT:
Before lifting car seat, place
handle in
“locked”
upright carrying
position.
OPERATIONS and ADJUSTMENTS
10
1
2
3
4
5
