10
Please note the following:
The terminal can be securely fitted into your application by using the mounting holes positioned at the
two of the corners of the device make it possible to securely bolt the modem into your application.
The SIM card is mounted in the modem, and is accessible by to the user under a lid without the need to
use any tools.
Section 4 Electrical Description“2. Electrical Description” describes the pins and electrical characteristics or
of the modem’s terminal’s various connectors are described in
Section 4.2 Antenna Connector“2.3 Antenna Connector” provides information about the antenna
connector is found in “2.3 Antenna Connector”
A special DIN Rail Mounting Bracket can be offered as an accessory item (Art-Nr. 12304)
which allows installation of the modem in industrial environments using DIN Rails.
2.2
Identification
On the bottom of the device, you will find the type label.
Label
Description
S/N
Serial number
1
Serial number
IMEI
International Mobile
Equipment Identity
FW
GSM firmware version
HW-Rev.
Hardware Revision
Production date
CE conformity mark
Disposal in accordance
with European Directive
2002/96/CE
2.3
Physical Dimensions and Weight
Overall dimensions: 77 x 67 x 26 mm
Weight: approx. 80g
1
Note that the serial number consists of a 4-digit product ID followed by the device’s IMEI.
