36
WEP Key Update Period:
The time interval WEP will then be updated; the unit is in
seconds; default is 300 seconds; 0 = do not rekey.
EAP Reauth Period:
EAP re-authentication period in seconds; default is 3600; 0 =
disable re-authentication.
Authentication RADIUS Server Settings
Authentication Server:
Enter the IP address of the Authentication RADIUS server.
Port:
The port number used by Authentication RADIUS server. Use the default 1812 or
enter port number specified.
Shared secret:
The secret key for system to communicate with Authentication RADIUS
server. Support 1 to 64 characters.
Accounting Server:
Check on the respected button to enable either Enable or Disable
accounting RADIUS server.
Secondary Authentication RADIUS Server
Authentication Server:
Enter the IP address of the Authentication RADIUS server.
Port:
The port number used by Authentication RADIUS server. Use the default 1812 or
enter port number specified.
Shared secret:
The secret key for system to communicate with Authentication RADIUS
server. Support 1 to 64 characters.
3.8 WDS Setup - Expand your Wireless Network
In AP mode only supports four WDS function on VAP0
Service:
By default, it's “Disable”. To “Enable” to activate WDS
Enable:
Click Enable checkbox to create WDS link.
WDS Peer's MAC Address:
Enter the MAC address of WDS peer.
Description:
Description of WDS link.
Change these settings as described here and click
Save
button to save your changes. Click
Reboot
button to activate your changes.
