75
MAC Filter Rule :
By default, it’s “Disable”. Options are Disabled, Only Deny List MAC or
Only Allow List MAC.
Action :
Only Allow List MAC:
The wireless clients in the MAC Filter List will be allowed to
access to Access Point; All others will be denied.
Only Deny List MAC :
The wireless clients in the MAC Filter List will be denied to
access to Access Point; All others will be allowed.
MAC Address
:
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click
“Add”
button, then the MAC
address should display in the MAC Filter List.
There are a maximum of 20 clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the Add and Delete
buttons.
Schedule :
Can choose to use rule by “Time Policy”
Click
Reboot button
to activate your Setting
8.4 Virtual Server (This function must be used WISP mode)
The
“Virtual Server”
can also referred to as
“Port Forward”
as well and used interchangeably.
Resources in the network can be exposed to the Internet users in a controlled manner including
on-line gaming, video conferencing or others via Virtual Server setup. Don’t repeat ports’ usage
to avoid confusion.
Suppose you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the
example), and port 80 to another (B in the example). You assign the LAN IP addresses and the
ISP assigns the WAN IP address. The NAT network appears as a single host on the Internet.
Please click on
Advance -> Virtual Server
and follow the below setting.
