V2.0
If there is no DHCP server in the network or if you want to use a second DHCP server to
assign IP, the administrator can enable this function to set the network segment to assign IP
addresses.
Start IP :
Set Start IP for DHCP Service.
End IP :
Set End IP for DHCP Service.
Netmask: Set IP Netmask, the default is 255.255.255.0
Gateway: Set Gateway IP for DHCP Service.
DNS(1-2) IP :
Set DNS IP for DHCP Service.
WINS IP :
Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
Domain :
Enter the domain name for this network.
Lease Time :
The IP addresses given out by the DHCP server will only be valid for the duration
specified by the lease time. Increasing the time ensure client operation without interruptions,
but could introduce potential conflicts. Lowering the lease time will avoid potential address
conflicts, but might cause more interruptions to the client while it will acquire new IP addresses
from the DHCP server. Default is
86400
seconds
DHCP Client List
Administrator can view IP address used status of client users on each DHCP Server.
If there are two DHCP servers in the network environment, please do not repeat the IP
address assignment of the two DHCP servers to avoid causing IP conflicts.
Summary of Contents for SEFA OW-500 A1
Page 75: ...V2 0 ...
Page 146: ...V2 0 ...
