V2.0
R0 Key Lifetime:
Default lifetime of the PMK-RO in minutes, the default is 10000, administrator
can setting 1~65535.
Reassoc deadline:
Reassociation deadline in time units (TUs / 1.024 ms; range 1000~65535).
The default is 1000.
R0/NAS Identifier:
PMK-R0 Key Holder identifier. When using IEEE 802.11r, nas_identifier must
be set and must be between 1 and 48 octets long.
R1 Identifier:
PMK-R1 Key Holder identifier 6-octet identifier as a hex string.
R1 Push:
Administrator can select Enable or disable. If enable the function will automatically
sent the R1 Key.
R0 Key Holder:
To enable roaming between multiple AP devices, AP1 must key in the MAC Address of AP2, and AP2
must key in the MAC Address of AP1. The NAS Identifier and 128-bit Key should be identical in both
AP settings. This will enable device roaming between the two Access Points.
MAC Address:
Administrators must enter the MAC Address of other AP
NAS Identifier:
Enter 1~48 octets of network domain name.
128-bit Key:
Enter
Shared Key of 128 bit.
R1 Key holders :
Enter a unified set of R1 Key Holder identification certification.
Summary of Contents for SEFA OW-500 A1
Page 75: ...V2 0 ...
Page 146: ...V2 0 ...
