V2.0
WDS Setup:
Administrator can select Enable or Disable.
Security Type:
Enable or Disable AES 128bit encryption function.
Pass Phrase :
AES encryption custom key can input 0 ~ 9 numbers or A ~ Z uppercase and
lowercase English format, it can support 8 ~ 32 characters key encryption algorithm in each
WDS connecting each other with secure encrypted transmission.
MAC Address :
Enter the MAC address of the other party's host to agree to accept the
connection.
WDS Client Setup:
Administrator can used
Radio 0(2.4G) or Radio 1(5G) or Radio 2(5G)
for
WDS Links. A Single Radio supports up to 8 WDS links.
VLAN Setup:
The WDS aisle support Multi-tag VALN
Click
“Save”
button to save your set function. Then click “Reboot” button to activate your changes.
5.5.6
WDS Status
Displays 2.4G and 5G radio WDS link status through MAC and Date (TX/RX)
Please click on
Wireless -> WDS status
WDS considerations
1.
When two wireless APs want to use WDS connection, the channels of the
two must be the same.
2.
If the two base AP stations are A and B, the WDS Client Setup of station A needs to
set the wireless MAC address of station B, and the WDS Client Setup of station B
needs to set the wireless MAC address of station A.
3.
If tags must be used in the architecture, the APs on both sides can select
multiple sets of tags in the virtual network settings.
4. WDS encryption setting is by optional use.
Summary of Contents for SEFA OW-500 A1
Page 75: ...V2 0 ...
Page 146: ...V2 0 ...
