background image

 

 

PanelVisa

 

A-12 

The operation of the Key Panel and Touch Panel 
 

PV037-LSK,  a  kind  of  key  panel  equipped  with  a  3.7”  160(H)  x80(V)  resolution  LCD 

display, a 22 keys membrane, allows users to design various applications. If the touch 

panel is not fixed in a right position, set the DIP-SW1, SW2 and SW3 to off to execute 

the  touch  panel  adjustment.  Please  adjust  it  while  needed  and  do  not  do  the 

unnecessary adjustment.

 

 

The  Key  panel  PV037-LSK,  is  equipped  with  22  keys  on  the  membrane.  Those  keys 

are some for numeric entry and some for programmable function keys. There are four 

function  keys,  which  can  be  assigned  with  various  functions  in  any  screen  from  the 

software. The other 0-9 ten keys on the membrane provide numerical entering function. 

They can also be locked temporarily. Press ESC and ENT at the same time to lock the 

ten keys. To unlock, press ESC and ENT again. For double-key’s application, users can 

operate to press together ESC and F1~F4 to act as a programmable function keys. The 

Panel will automatically judge the data format or up/down settings to complete the data 

input. 

 

PL035-TST/PL037-LST/PV035-TST/PV037-LST, a kind of touch panel equipped with a 

3.5” 320(H) x240(V) or 3.7” 160(H) x80(V)resolution LCD display, an analog input touch 

panel,  allows  users  to  design  various  applications.  If  the  touch  panel  is  not  fixed  in  a 

right position, press the touch panel glass while power on and entry BIOS screen. You 

can select “Touch Panel” option to execute the touch panel adjustment function. Please 

adjust it while needed and do not do the unnecessary adjustment.

 

 

PL057-LST/PL057-TST/PV057/PV058/GD057/GD058  is  a  kind  of  touch  panel 

equipped with a 5.7”, 320(H)x240(V) size LCD display and an analog input touch panel. 

It  accepts  to  have  maximum  40x30  touch  buttons  in  a  screen.  The  shapes  of  touch 

keys  should  be  rectangles  with  sizes  from  minimum  8(H)  x8(V)  pixels  to  maximum 

320(H) x240(V) pixels. 

Summary of Contents for GD058-TST
























Reviews: