Download AP
To download AP to HMI, please make sure the download cable is
connected properly. During the operating or in startup menu the HMI is
ready to receive AP data sent by PC automatically. When download AP
the SW2=ON.
FigureA-8 HMI downloading data from PC
1. Connect the PC COM1 or Com2 and HMI with a PC download cable.
HMI ConnectorPC RS232C
9-pin Female --------- 9-pin Female
HMI ConnectorPC Connector
9-pin Male ---------- 9-pin Female
HMI COM2 ---- PC COM
HMI COM1 ------ PC COM
Serious Caution: Be sure turn off the power before connecting or it will
damage the HMI communication components.
2. The HMI will judge the data correctness during downloading AP.
When the PC sends AP data to HMI, the HMI will show download
AP screen and display related information automatically to receive
data. The HMI will show ”Incorrect Model !” when the Model No. is
not set correctly in the AP data. Please select a correct Model No.
from
the
software
then
download
it
again.
If
the
HMI
shows ”Incorrect User ID Code !”, then the hardware and software
might not fit each other. Please check the brand name of the HMI
to make sure you purchased a right hardware.
King View
A-12
